Palyginimas DC Bias ir impulsas šališkumas

Aug 14, 2024|

Palyginimas DC šališkumas ir impulsas šališkumas

Traditional arc ion plating is to apply DC negative bias on the substrate to control the ion bombardment energy. This deposition process has the following disadvantages: 1. The high temperature of the substrate is not conducive to depositing a hard film on the substrate with a low tempering temperature. 2. 3. High energy ion bombardment causes serious sputtering, and hard films with high reaction threshold energy cannot be synthesized simply by increasing the ion bombardment energy. 4. In the DC bias arc ion plating process, to restrain the excessive substrate temperature caused by the continuous bombardment of positive ions on the substrate surface, measures such as reducing the deposition power, shortening the deposition time and adopting intermittent deposition methods are mainly adopted to reduce the deposition temperature. These measures can be summarized as energy control methods. Although this method can reduce the deposition temperature, it also reduces some properties of the film and also reduces the production efficiency and the stability of the film quality, so it is difficult to promote the application. In the pulsed bias arc ion plating process, because ions are bombarded by the substrate surface in a non-continuous pulse mode, the temperature gradient between the substrate and the surface can be changed by adjusting the duty cycle of the pulse bias, and then the heat equalization compensation effect between the substrate and the surface can be changed to achieve the purpose of regulating the deposition temperature. In this way, the height of the biased pulse can be independently separated from the workpiece temperature (do not affect each other or have little influence), and the high voltage pulse can be used to obtain the bombardment effect of high energy ions to improve the organization and performance of the film, and the total heating effect of ion bombardment can be reduced by reducing the duty cycle to reduce the deposition temperature.

IKS PVD įmonė, dekoratyvinė danga mašina, įrankiai danga mašina, DLC danga mašina, optinė danga mašina, PVD vakuumas danga linija, the turn-key project is available. Contact us now, E-mail: iks.pvd@foxmail.com

Siųsti užklausą